Tag Archives: Pump Selection

Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities – BALI

[S084]

WAKTU

Bandung, 06 – 09 September 2016

yogyakarta, 22 – 25 November 2016

 

INVESTASI

IDR 9.750.000 ,-/ Person, (excluded tax 10% and accommodation)

NARASUMBER

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

DESKRIPSI

OBJECTIVES :

AAfter participate in this course, the participants will be able and capable to :

¨       Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.

¨       Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.

¨       Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.

¨       Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

AUDIENCE:

No specified (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE

¨    Introduction to Oil and Gas Production Operation

¨    Oil Surface Production Facilities

§      Well Equipments

§      Pigging System

§      Separator

§      Gas Scrubber

§      Gas Dehydarator

§      Pumps : Centrifugal, Reciprocating, Diaphragm

¨    Gas Surface Processing Facilities

§      Gas Sweetening

§      Heat Exchanger

§      Fractionation, Liquefaction, Refrigeration System

§      Compressor

¨    Pump Basic Theory

§      Centrifugal Pump

§      Conservation of Mass

§      Specific Velocity

§      Pump Performance

§      Cavitations

¨    Pump Specification

§      Pump Specification

§      Flow Capacity

§      Fluid Properties

§      Head

§      Net Positive Heads

§      Rotation Determination and Pump Types

§      Viscous Fluid Correction

§      Material Selection

§      Prime Movers Selection

¨    Pump Application

§      Pump Installation Plan

§      Pump Application Example

¨    Pump Construction

§   Pump Classification by Impeller

§   Pump Classification by Casing

§   Pump Classification by Stage Number

§   Pump Classification by Axis Position

¨    Pump Operation

§      Head Capacity Curve

§      Parallel and Serial Operation

§      Capacity Regulator

§      Water Hummer

§      Surging

§      Pressure Fluctuation

§      Automatic Operation

¨    Pump Instalation

§      Horizontal Instalation

§      Vertical Instalation

§      Submersible Instalation

§      Pipping System

§      Vibration and Noise Protection

¨    Pump Maintenance

§      First Inspection

§      Operation Condition Observation

§      Safety Instrument

§      Maintenance Management

§      Overhaul

¨       Pump Trouble Shooting

§      General Trouble Shooting

§      Submersible Pump Trouble Shooting

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016

Print This Post Print This Post Email This Post Email This Post

Share

PUMP SELECTION, DESIGN AND OPERATION FOR OIL & GAS SURFACE PRODUCTION FACILITIES – Yogyakarta

PUMP SELECTION, DESIGN AND OPERATION FOR OIL & GAS SURFACE PRODUCTION FACILITIES – Yogyakarta

[S307]

TIME

• 23 – 25 Juni 2015
• 28 – 30 Juli 2015
• 25 – 27 Agustus 2015
• 21 – 23 September 2015
• 27 – 29 Oktober 2015
• 24 – 26 November 2015
• 21 – 23 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT; & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Training Objectives :
After participate in this course, the participants will be able and capable to :
• Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
• Diagnostic of oil and gas flow performance under actual pumping drive mechanism and future performance with current handling processes.
• Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
• Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

MATERI
Training Material Outline :
1. Introduction to Oil and Gas Production Operatio
2. Oil Surface Production Facilities
• Well Equipments
• Pigging System
• Separator
• Gas Scrubber
• Gas Dehydarator
• Pumps : Centrifugal, Reciprocating, Diaphragm
3. Gas Surface Processing Facilities
• Gas Sweetening
• Heat Exchanger
• Fractionation, Liquefaction, Refrigeration System
• Compressor
4. Pump Basic Theory
• Centrifugal Pump
• Conservation of Mass
• Specific Velocity
• Pump Performance
• Cavitations
5. Pump Specification
• Pump Specification
• Flow Capacity
• Fluid Properties
• Head
• Net Positive Heads
• Rotation Determination and Pump Types
• Viscous Fluid Correction
• Material Selection
• Prime Movers Selection
6. Pump Application
• Pump Installation Plan
• Pump Application Example
7. Pump Construction
• Pump Classification by Impeller
• Pump Classification by Casing
• Pump Classification by Stage Number
• Pump Classification by Axis Position
8. Pump Operation
• Head Capacity Curve
• Parallel and Serial Operation
• Capacity Regulator
• Water Hummer
• Surging
• Pressure Fluctuation
• Automatic Operation
9. Pump Instalation
• Horizontal Instalation
• Vertical Instalation
• Submersible Instalation
• Pipping System
• Vibration and Noise Protection
10. Pump Maintenance
• First Inspection
• Operation Condition Observation
• Safety Instrument
• Maintenance Management
• Overhaul
11. Pump Trouble Shooting
• General Trouble Shooting
• Submersible Pump Trouble Shooting

PESERTA
Operator, Engineer, karyawan perusahaan migas dan siapa saja yang membutuhkan training ini.

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

Pump Selection, Design And Operation For Oil And Gas Surface Production Facilities – BANDUNG

[S093-235-1101]

WAKTU

Pilih waktu yang diinginkan di bagian pre registration form

a. 18 – 21 July 2011
b. 21 – 24 November 2011

TEMPAT

Hotel Golden Flower Bandung

INVESTASI

1. Rp 7.250.000/person (full fare) or
2. Rp 7.000.000/person (early bird, payment 1 week before training) or
3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

INSTRUKTUR

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.
Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.
Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

DESKRIPSI

After participate in this course, the participants will be able and capable to :
a. Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
b. Diagnostic of oil and gas flow performance under actual pumping drive mechanism and future performance with current handling processes.
c. Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
d. Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

AUDIENCE:
No specified (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :
1. Introduction to Oil and Gas Production Operation
2. Oil Surface Production Facilities
a. Well Equipments
b. Pigging System
c. Separator
d. Gas Scrubber
e. Gas Dehydarator
f. Pumps : Centrifugal, Reciprocating, Diaphragm
3. Gas Surface Processing Facilities
a. Gas Sweetening
b. Heat Exchanger
c. Fractionation, Liquefaction, Refrigeration System
d. Compressor
4. Pump Basic Theory
a. Centrifugal Pump
b. Conservation of Mass
c. Specific Velocity
d. Pump Performance
e. Cavitations
5. Pump Specification
a. Pump Specification
b. Flow Capacity
c. Fluid Properties
d. Head
e. Net Positive Heads
f. Rotation Determination and Pump Types
g. Viscous Fluid Correction
h. Material Selection
i. Prime Movers Selection
6. Pump Application
a. Pump Installation Plan
b. Pump Application Example
7. Pump Construction
a. Pump Classification by Impeller
b. Pump Classification by Casing
c. Pump Classification by Stage Number
d. Pump Classification by Axis Position
8. Pump Operation
a. Head Capacity Curve
b. Parallel and Serial Operation
c. Capacity Regulator
d. Water Hummer
e. Surging
f. Pressure Fluctuation
g. Automatic Operation
9. Pump Instalation
a. Horizontal Instalation
b. Vertical Instalation
c. Submersible Instalation
d. Pipping System
e. Vibration and Noise Protection
10. Pump Maintenance
a. First Inspection
b. Operation Condition Observation
c. Safety Instrument
d. Maintenance Management
e. Overhaul
11. Pump Trouble Shooting
a. General Trouble Shooting
b. Submersible Pump Trouble Shooting

INFORMASI PENDAFTARAN
Ketik SMS dengan format :

DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL

-kirim ke 085286451074

Contoh :

DAFTAR Ahli K3 Umum#2Mei2011#ARIEF#Company#3#nama@email.com

atau ISIKAN FORM BERIKUT :

Print This Post Print This Post Email This Post Email This Post


Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share
Share