DEEPWATER FLOATING PRODUCTION SYSTEM DESIGN & ANALYSIS – Yogyakarta

DEEPWATER FLOATING PRODUCTION SYSTEM DESIGN & ANALYSIS – Yogyakarta

[S307]

TIME

• 7 – 9 Juli 2015
• 4 – 6 Agustus 2015
• 1 – 3 September 2015
• 6 – 8 Oktober 2015
• 3 – 5 November 2015
• 1 – 3 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT & Team

(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Floating Production Systems are becoming more common as oil discoveries are made in deeper waters. The objectives of this Workshop are to provide an introduction to the drivers for floater selection and design, and to provide an appreciation of the main tools and methods used in designing and analyzing these structures.
The program will begin by taking a broad look at deepwater development from the standpoint of field development planning, processing, and concept selection. Emphasis will be on the application of structural and naval architectural principles, and design codes, to the sizing and analysis of performance of moored platforms and risers. Examples will include Spars, Tension Leg Platforms, Semi-Submersibles and FPSOs.
After this course the participants should be able to identify the design drivers for the platforms and to perform high level sizing. They should understand the concept of floater stability, the different types of mooring systems and risers, and methods for their design and analysis
By fully participating in this short course, participants with solid background in conventional offshore oil field development, planning, processing and technology application will gain ground understanding on the greater risk of deepwater oil field development, which in short it needs higher commitment, higher and world complex technology and much higher cost involvement.
In the initial part of the course for some introduction way of addressed economic magnitude, technology services and major specific equipment and source required on each stage of deepwater field from the exploration development to the production stages this short course will be beneficial for deepwater oil field engineers, planners as well as the regulator (the authorities) and oil field contractors and services companies.

MATERI
Training Outlines :
1. Introduction to Deepwater Development Systems
2. Introduction, Trends in deepwater development systems, examples of deepwater projects, planning issues, considerations of deepwater field development, concept selection
3. Drilling in deepwater environment
4. Deepwater challenges and new technologies, drilling functions and considerations, MODU drilling, drilling from Spar and TLP
5. Conceptual and Functionality of Floating Production Systems
6. Overview of floater capabilities, dry tree system in fixed, compliant Tower, TLP, and Spar platform, wet tree system in TLP, cell Spar, FPSO, control buoy, SS Tieback and Semi-FPS
7. Strength consideration of floating structures
8. Basic stresses, local buckling stresses, hydrostatic pressure, plated and tubular structure design, design rules and requirement
9. Fatigue assessment of floating structures
10. Fatigue capacity, action and loads, S-N curves, nominal and hot and spot stress, simplified, deterministic and spectral-based fatigue assessment, fracture mechanics
11. Hydrodynamics and global response of floaters
12. Wave spectra and its application, wave and fluid forces, dynamics of floating bodies, wave statistics,
13. Irregularity of seaway and histogram, response amplitude operator
14. Hydrostatic and Stability of Floaters
15. Important rules of floating structure design, coordinate system and transformations, buoyancy and stability parameters, hydrostatic stiffness, MODU stability rules
16. Mooring design and analysis
17. Effect of wind and current loads, station-keeping, passive mooring system, catenary spread and taut mooring system, mooring components and equipment

PESERTA
Executive Engineers and Managers who are involved and interested in :
• Feasibility Studies on Deepwater Field Development
• Information on new technological development
• Applicability of different floating concepts to the Worldwide projects.
• Civil or Mechanical Engineers and Naval Architects with basic
• background in structural engineering and hydrodynamics, but not familiar with floating structure design.

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

Comments are closed.

Post Navigation

Share