Tag Archives: Training Juru Las

SERTIFIKASI JURU LAS UNTUK PROSES GTAW & SMAW Kelas 1-3

[S080]

  • 21-26 Agustus 2017 (RUNNING)
  • 25-30 September 2017
  • 23-28 Oktober 2017
  • 20-25 November 2017
  • 18-23 Desember 2017

TEMPAT
Jakarta (Teori) dan Balai Latihan Kerja – Bekasi (Praktek)

INVESTASI

Pilihan Kelas :

 Kelas 1 (SMAW)     17.500.000
 kelas 2 (SMAW)     16.750.000
 kelas 3 (SMAW)     16.000.000
 Kelas 1 (GTAW)     17.500.000
 Kelas 2 (GTAW)     17.000.000
 Kelas 3 ( GTAW)     16.500.000

Biaya tersebut sudah termasuk

Hand out, Training Kit, 2X Coffee Break, Lunch, Bahan praktek seperti gerinda, tanggem, tempat praktek (workshop), plat strip 6 mm & 10 mm, PPE, sikat kawat, mesin las, kawat las dan sertifikasi dari Depnakertrans. Biaya tersebut tidak termasuk Pajak – pajak.

INSTRUKTUR

Praktisi

DESKRIPSI

SERTIFIKASI JURU LAS UNTUK PROSES GTAW & SMAW

I. PEMBEKALAN TRAINING
Pembekalan dilaksanakan selama 6 hari dengan materi sebagai berikut:

Materi Pelatihan:
1. Pengenalan Teknologi Pengelasan ( Welding Technology Introduction )
– Pengelasan Fillet dan Pengelasan Groove
– Jenis – Jenis Sambungan dasar ( Basic Type of joint )
– Persiapan Sambungan Las
– Posisi Pengelasan ( Welding Position )
– Klasifikasi Proses Pengelasan Logam
– Parameter Pengelasan dan dasar teknology pengelasan
– Code pengelasan yang berkaitan dengan Standard
1. American Welding Society ( AWS ) related to ASME Section IX
2. European Welding Federation (EWF ) related to ISO standard
– Welding Procedure Specification ( WPS ) and Procedure Qualification Record
(PQR ) implementation at welding practice.
– Daerah Terpengaruh Panas pada Sambungan Las ( HAZ – Zone )
– Cacat cacat Las ( Welding Defect )
– Sifat mampu las material ( Weld ability kind of materials )
– Distorsi Pengelasan ( Welding Distortion )

2. Proses Pengelasan ( welding process )
– Gas Tungsten Arc Welding (GTAW)
– Tipe Pengelasan ( welding Type )
– Set-up Welding Power Source
– Set-up Welding Parameter
– Teknology Pengelasan GTAW
– Persiapan Sambungan Las
– Pengaturan/pemilihan jenis arus Las
– Pengujian Hasil Las
– Implementasi WPS pada proses pengelasan
– Kualifikasi Juru las untuk Plate or Pipe
– Kualifikasi Juru Las untuk Fillet Weld atau Groove Welds
– Identifikasi cacat cacat Las GTAW
– Pengetahuan tentang las electroda las
– Keselamatan Kerja dan PPE di pengelasan GTAW
– Pengetahuan tentang jenis jenis gas pelindung CO,CO2,Argon dll

3. Pengetahuan Bahan Teknik
– Pengetahuan Logam Ferrous dan Logam Non-Ferrous
– Sifat Mampu Las dari Logam ( Weld-ability of materials)
– Sifat Sifat Logam Secara UMUM
– Perubahan Struktur Mikro pada sambungan Las ( HAZ )
– Metallurgy Las
– Perlakuan Panas ( Heat treatment ) Logam las

4. Keselamatan Kerja Di Bidang Pengelasan
– Identifikasi Bahaya Pada bidang Kelistrikan
– Identifikasi Bahaya pada sumber gas ( fume )
– Identifikasi Bahaya pada Ledakan
– Identifikasi Bahaya pada spatter
– Identifikasi Bahaya pada Sinar Ultraviolet
– Confine Space
– Personal Protection Equipment ( PPE )
– Ergonomic of welding

5. Praktek Pengelasan
Posisi pengelasan untuk GTAW:
1G, 2G,3G,4G.
Posisi pengelasan sesuai dengan kemampuan welder dan saran dari Instruktur.

INFORMASI PENDAFTARAN

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING ISO#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

atau ISIKAN FORM BERIKUT :

Ketikkan kelas yang ingin diikuti

Print This Post Print This Post Email This Post Email This Post


Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

CSWIP 3.0 – Visual Welding Inspector – Level 1

[S177]

07/03/2016, 09/05/2016, 25/07/2016, 05/09/2016, 01/11/2016
Duration: 2 (days) course and 1 day examination

TEMPAT

Hotel Amaris, Cilegon – Banten

INVESTASI

USD $ 835

FASILITATOR

Expert from TWI (The Welding Institute) from UK London

DESKRIPSI

CSWIP 3.0 – Visual Welding Inspector – Level 1

Suitable for:

Welders, operators, line inspectors and foremen who undertake visual examination of welded joints; quality control staff associated with welding; all staff who need basic training in welding inspection coupled with a qualification in this field.

This course is also available with a practical module: CSWIP 3.0 Plus – Visual Welding Inspector with Practical Module (4 days).

Course Content:

This welding inspection course covers: visual inspection procedures; relevant codes of practice, terms and definitions; welding processes and typical welding defects; weld measurements; typical documentation and requirements; practical inspection and reporting. All CSWIP requirement documents are available at www.cswip.com.

Certification/Awarding Body:

Course Objectives:

• To identify various weld imperfections (defects)
• To understand the relevant welding technology related to visual inspection
• To understand the need for documentation in welding
• To be aware of codes and standards related to inspection requirements
• To carry out inspection of parent materials and consumables
• To carry out visual inspection of welds, report on them and assess their compliance with specified acceptance criteria
• To pass the CSWIP 3.0 Visual Welding Inspector qualification.

Additional Information:

• Examination applicants must submit a detailed CV/résumé when booking this course
• Enrolment on this course does not constitute reservation of an examination. All courses may be followed by a CSWIP Welding Inspector examination for candidates with appropriate experience as specified in CSWIP document WI-6-92. All CSWIP requirement documents are available at www.cswip.com

Entry Requirements

Although there is no specific experience required, it is recommended that candidates possess a minimum of six months’ welding-related engineering experience and two years’ industrial experience.

In addition, candidates must comply with Clause 1.3.4 of CSWIP document WI-6-92 available at www.cswip.com

Career Progression:

• CSWIP 3.1 – Welding Inspector – Level 2
• CSWIP 3.2 – Senior Welding Inspector – Level 3
• Radiographic Interpretation (RI) – Principles (Part A)
• BGAS-CSWIP Painting Inspector – Grade 2/3
• BGAS-CSWIP Painting Inspector – Grade 1
• BGAS-CSWIP Site Coatings Inspector

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

Print This Post Print This Post Email This Post Email This Post

Share
Share