Tag Archives: Oil & Gas Production System

Oil & Gas Production System – BANDUNG

Oil & Gas Production System

[S093]

WAKTU

30 Juli – 02 aug 2012

TEMPAT

Hotel Grand Flower – Bandung

INVESTASI

1. Rp 7.250.000/peserta (bayar penuh) atau
2. Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
3. Rp 6.750.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:
1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10. Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUCTOR

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

DESKRIPSI

TRAINING OBJECTIVES :

After completion of this training, the participants will be able to :

1.Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.

2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.

3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.

4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE :

No specified (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1.Gas Handling Facilities

a.Introduction to Gas Handling and Facilities

b. Gas Properties

Ideal gas

Real Gas

Gas Formation Volume Factor

Gas Compressibility

Gas-Water System

Gas-Condensate System

c. Gas Reservioir Performance

Reservoir Gas Flow

Gas Reserves

Well Completion Effect

Tight Gas Well

Gas Well Testing

d. Gas Piping System

Basic Flow Equation

Flow in Wells and Flow in Pipelines

Effect of Liquids

Use of Pressure Traverse Curve

Liquid Removal from Gas Wells

e. Gas Compression

Type of Compressors

Compressor Design

Centrifugal Compressor

f. Total System Analysis

Tubing and Flow Line Effect

Separator Pressure Effect

Compressor Selection

g. Flow Measuring

Orifice Metering

Metering System Design

Other Metering Methods

h. Gas Condensate Reservoir

Well Testing and Sampling

Gas Cycling

i. Field Operation Problems

Pressure Cumulative Production Plot

Hydrate Formation

Sour Gas Production

Corrosion Control With Inhibitors

Sulfur Deposition

j. Gas Processing

Field treatment of Natural Gas

Gas Plant Operation

Gas Dehydration

Gas Sweetening

2. Oil Handling Facilities

a. Oil Well Surface Production Equipment and Operation

Oil Well Equipment

Oil Well Production Operation

Well Automatic Safety Device

b. Oil Gathering System. Manifold and Flowline

Oil Gathering System

Maniflod System

Flowline Sizing and Design

c. Crude Oil and Gas Separation

Separator and Principle of Separation

Design of Separator

Oil Dehydration

d. Principles of Measurement

Introduction to Measurement

Crude Oil Measurement

Gas Measurement

e.Well Test

Introduction

Responsibility for Test

Preparation for Test

Types of Well Test

Equipment and Procedures

Accuracy of Fluid Measurement

Problem in Testing

Type of Test

f. Artificial Lift Method

Gas Lift

Submersible Pump

Sucker Rod Pump

Hydraulic Pump

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

Print This Post Print This Post Email This Post Email This Post

Share

Oil & Gas Production System – BANDUNG

[S093-245-1102]

WAKTU

Pilih waktu yang diinginkan di bagian pre registration form

a. 21 – 24 March 2011
b. 8 – 11 August 2011

TEMPAT

Hotel Golden Flower, Bandung

INVESTASI

1. Rp 7.250.000/person (full fare) or
2. Rp 7.000.000/person (early bird, payment 1 week before training) or
3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

INSTRUKTUR

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.
Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.
Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

DESKRIPSI

TRAINING OBJECTIVES :
After completion of this training, the participants will be able to :
1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE :
No specified (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :
1. Gas Handling Facilities
a. Introduction to Gas Handling and Facilities
b. Gas Properties
– Ideal gas
– Real Gas
– Gas Formation Volume Factor
– Gas Compressibility
– Gas-Water System
– Gas-Condensate System
c. Gas Reservioir Performance
– Reservoir Gas Flow
– Gas Reserves
– Well Completion Effect
– Tight Gas Well
– Gas Well Testing
d. Gas Piping System
– Basic Flow Equation
– Flow in Wells and Flow in Pipelines
– Effect of Liquids
– Use of Pressure Traverse Curve
– Liquid Removal from Gas Wells
e. Gas Compression
– Type of Compressors
– Compressor Design
– Centrifugal Compressor
f. Total System Analysis
– Tubing and Flow Line Effect
– Separator Pressure Effect
– Compressor Selection
g. Flow Measuring
– Orifice Metering
– Metering System Design
– Other Metering Methods
h. Gas Condensate Reservoir
– Well Testing and Sampling
– Gas Cycling
i. Field Operation Problems
– Pressure Cumulative Production Plot
– Hydrate Formation
– Sour Gas Production
– Corrosion Control With Inhibitors
– Sulfur Deposition
j. Gas Processing
– Field treatment of Natural Gas
– Gas Plant Operation
– Gas Dehydration
– Gas Sweetening
2. Oil Handling Facilities
a. Oil Well Surface Production Equipment and Operation
– Oil Well Equipment
– Oil Well Production Operation
– Well Automatic Safety Device
b. Oil Gathering System. Manifold and Flowline
– Oil Gathering System
– Maniflod System
– Flowline Sizing and Design
c. Crude Oil and Gas Separation
– Separator and Principle of Separation
– Design of Separator
– Oil Dehydration
d. Principles of Measurement
– Introduction to Measurement
– Crude Oil Measurement
– Gas Measurement
e. Well Test
– Introduction
– Responsibility for Test
– Preparation for Test
– Types of Well Test
– Equipment and Procedures
– Accuracy of Fluid Measurement
– Problem in Testing
– Type of Test
f. Artificial Lift Method
– Gas Lift
– Submersible Pump
– Sucker Rod Pump
– Hydraulic Pump

INFORMASI PENDAFTARAN
– Silahkan isi form dibawah ini jika anda ingin mendaftar :

Print This Post Print This Post Email This Post Email This Post


Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share
Share