Tag Archives: Basic Drilling Engineering

Basic Drilling Engineering, and Health, Safety, Environmental Consideration

[S300]

WAKTU
29-31 Agustus 2016
27-29 September 2016
24-26 Oktober 2016
15-17 November 2016
26-28 Desember 2016

TEMPAT

Jakarta

INVESTASI
Rp. 8.500.000,- Per Peserta
*Termasuk : Modul Handout, Certificate, 2x Coffee Break/day, Lunch/day, Souvenir menarik.

FASILITATOR

Tim Instruktur PT. Zigot Mediatama yang sudah berpengalaman di bidangnya.

DESKRIPSI

Basic Drilling Engineering, and Health, Safety, Environmental Consideration

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.
  • Pengetahuan tentang Peraturan Perundangan dalam K3L
  • K3L dalam Operasi Pemboran

PRE-REQUISITE :
Latar belakang : Operator/Senior Operator/Engineer/Non Engineer

MATERI KURSUS

    • Peraturan Pemerintah Tentang K3LH
      • UU No. 22 / 2001
      • PASAL 40 ayat (2), (3) dan (6)
    • Behaviour Base Safety
      • Line of Fire
      • PPE Selection
      • Lock Out Tag Out
      • Hazard Identification
    • Risked Activity
    • Personal Protective Equipment (PPE)
      • Line of Fire
      • PPE Selection
      • Lock Out Tag Out
      • Hazard Identification
    • Introduction : Rotary Drilling Operations
      • Steps to drilling a well
      • Hard Hat
      • Safety Goggles And Glasses
      • Gloves
      • Safety Boots
      • Hi-viz Clothing
      • Safety Harnesses
      • Rig Components
      • Rig Systems
    • Rheology of Drilling and Completion Fluids
      • Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids
      • Fluid Types,
      • Fluid Models
      • Introduction to Rotary Viscometer
      • Other Testing Equipment
      • Objectives of Monitoring Fluids
    • Mud System
      • General Equations and ConceptsDiagnostic tests
      • Water based muds
      • Oil based muds
      • Additives
      • Mud handling system
    • Cementing
      • Tubing DesignFunctions of cement
      • Cement Types
      • Cement Additives
    • Oil Field Tubulars and Hydraulics
      • Drill string
      • Casing and tubing
      • Casing classification
      • Stresses on casing
      • Casing setting depth
      • Burst and collapse calculations
      • Wellheads
    • Drilling System Pressure Loss Calculations
      • Hydrostatics
      • Buoyancy
      • Flow through pipes and annuli
      • Flow path
      • Pressure loss calculations
    • Drilling System Bit & Nozzles
      • Hydrostatics Bit Types
      • Bit Parts
      • Bit Classification
      • Bit Nozzles
    • Introduction to Well Control
      • Hydrostatics Definitions
      • Causes of kicks
      • Kick indicators
      • Shut-in procedure
      • Well Kill Procedures
    • Directional Drilling
      • Reasons for directional wells
      • Planning Trajectory
      • Kickoff Methods
      • Survey Methods
      • Survey Calculations
    • Health, Safety and Environmental Consideration in Drilling Operation
      • Pengauh Gas Beracun pada Operasi Pemboran
      • Pengaruh Gas Beracun Bagi Kesehatan
      • H2S
      • Gas Detection Equipments

 
ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016
Print This Post Print This Post Email This Post Email This Post

Share

Basic Drilling Engineering

Basic Drilling Engineering

[S084]

TIME

YOGYAKARTA
20 – 23 OKTOBER 2015

BANDUNG
04 -07 AGUSTUS 2015
08 – 11 DESEMBER 2015

BOGOR
08 – 11SEPTEMBER 2015

JAKARTA
28 – 31 JULI 2015
03 – 06 NOVEMBER 2015

VENUE

Hotel

INVESTMENT

IIDR 9.750.000,-/ Person, (exclude Ppn 10% & Acomodation)
Minimmum Participant 4 Person

Facilities
 Quality training material (hardcopy and softcopy)
 Quality training kits
 Morning and afternoon coffee / tea breaks and lunch for along the training
 Certificate of Completion
 Exclusive flash disk

FACILITATOR

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

DESCRIPTION

After completing this course participants are expected to be able to:
• Understanding the basic principles and simple calculations for implementation of well-drilling oil wells, gas and geothermal reservoir, develop implementation of this calculation to improve the performance of well-drilling wells in the field.
• Conduct simple diagnosis and comprehend the settlement and build oil, gas or geothermal wells.
• Create a simple analysis of oil, gas and geothermal wells exploration data, and able to design a global drilling performance and plan its development.
• Conduct the simple quantitative calculations of mapping out for drilling mud, cement, hydraulics, well control.
• Practise knowledges in vertical drilling design, for drilling wells sloping design, horizontal wells both using overbalance and underbalance technology.

PRE-REQUISITE:
Backgrounds: Operator, Senior Operator, Engineer/Non Engineer

COURSE OUTLINE:
1. Introduction : Rotary Drilling Operations
• Steps to drilling a well
• Types of rigs
• Rig Components
• Rig Systems
2. Rheology of Drilling and Completion Fluids
• Equations and Inflow Performance Relationship Functions of Drilling/ Completion
• Fluids
• Fluid Types,
• Fluid Models
• Introduction to Rotary Viscometer
• Other Testing Equipment
• Objectives of Monitoring Fluids
3. Mud System
• General Equations and ConceptsDiagnostic tests
• Water mud based
• Oil mud based
• Additives
• Mud handling system
4. Cementing
• Tubing DesignFunctions of cement
• Cement Types
• Cement Additives
5. Oil Field Tubules and Hydraulics
• Drill string
• Casing and tubing
• Casing classification
• Stresses on casing
• Casing setting depth
• Burst and collapse calculations
• Wellheads

  1. Drilling System – Pressure Loss Calculations
    • Hydrostatics
    • Buoyancy
    • Flow through pipes and annuli
    • Flow path
    • Pressure loss calculations
    7. Drilling System – Bit & Nozzles
    • Hydrostatics Bit Types
    • Bit Parts
    • Bit Classification
    • Bit Nozzles
    8. Introduction to Well Control
    • Hydrostatics Definitions
    • Causes of kicks
    • Kick indicators
    • Shut-in procedure
    • Well Kill Procedures
    9. Directional Drilling
    • Reasons for directional wells
    • Planning Trajectory
    • Kickoff Methods
    • Survey Methods
    • Survey Calculations
    • Hole Assemblies

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

BASIC DRILLING ENGINEERING – Yogyakarta

BASIC DRILLING ENGINEERING – Yogyakarta

[S307]

TIME

Jadwal Training Tahun 2015 :
• 16 – 18 Juni 2015
• 21 – 23 Juli 2015
• 18 – 20 Agustus 2015
• 15 – 17 September 2015
• 20 – 22 Oktober 2015
• 17 – 19 November 2015
• 15 – 17 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Proses pengeboran minyak bumi dilakukan dengan langkah-langkah yang terkonsep & sistematis. Dalam hal pengeboran minyak ini terdapat 2 aspek yang harus diperhatikan seperti: tujuan dari drilling yaitu untuk membuang, menghilangkan formasi batuan atau memuat jalur transportasi menuju ke batuan reservoir yang ada didalam perut bumi (sumur minyak), selanjutnya untuk membuang fragmen batuan (rock fragment, cutting) yang dihasilkan (lumpur bor) ketika operasi drilling dilakukan.

TUJUAN PELATIHAN :
• Mengetahui pengetahuan dan teknik dasar tentang pengeboran
• Mengetahui konsep kerja dalam pelaksanaan proses pengeboran, termasuk teknik & perhitungan material
• Memberikan analisa terhadap obyek pengeboran
• Mampu mengevaluasi pelaksanaan kerja pengeboran
• Mendesain rancangan sistem pengeboran dan mengembangkan tehnik-tehnik pengeboran sesuai sasaran proyek kerja

MATERI
MATERIAL OUTLINE:
• Introduction : Rotary Drilling Operations
• Rheology of Drilling and Completion Fluids
• Mud System
• Cementing
• Oil Field Tubules and Hydraulics
• Drilling System – Pressure Loss Calculations
• Drilling System – Bit & Nozzles
• Introduction to Well Control
• Directional Drilling

PESERTA
Peserta yang cocok untuk mengikuti training ini adalah seluruh karyawan perusahaan yang bergerak di bidang oil dan gas serta individu yang ingin memperdalam pengetahuan tentang materi training.

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

[RUNNING] Basic Drilling Engineering

Basic Drilling Engineering

[S084]

WAKTU

6-9 Nopember 2012 – RUNNING

TEMPAT

Bandung

INVESTASI

IDR 8.250.000,-/ Person

INSTRUKTUR

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

DESKRIPSI

COURSE OBJECTIVE:

After completing this course participants are expected to be able to:

  • Understanding the basic principles and simple calculations for implementation of well-drilling oil wells, gas and geothermal reservoir, develop implementation of this calculation to improve the performance of well-drilling wells in the field.
  • Conduct simple diagnosis and comprehend the settlement and build oil, gas or geothermal wells.
  • Create a simple analysis of oil, gas and geothermal wells exploration data, and able to design a global drilling performance and plan its development.
  • Conduct the simple quantitative calculations of mapping out for drilling mud, cement, hydraulics, well control.
  • Practise knowledges in vertical drilling design, for drilling wells sloping design, horizontal wells both using overbalance and underbalance technology.

PRE-REQUISITE:

Backgrounds: Operator, Senior Operator, Engineer/Non Engineer

COURSE OUTLINE:

  • Introduction : Rotary Drilling Operations
    • Steps to drilling a well
    • Types of rigs
    • Rig Components
    • Rig Systems
  • Rheology of Drilling and Completion Fluids
    • Equations and Inflow Performance Relationship Functions of Drilling/ Completion
    • Fluids
    • Fluid Types,
    • Fluid Models
    • Introduction to Rotary Viscometer
    • Other Testing Equipment
    • Objectives of Monitoring Fluids
  • Mud System
    • General Equations and ConceptsDiagnostic tests
    • Water mud based
    • Oil mud based
    • Additives
    • Mud handling system
  • Cementing
    • Tubing DesignFunctions of cement
    • Cement Types
    • Cement Additives
  • Oil Field Tubules and Hydraulics
    • Drill string
    • Casing and tubing
    • Casing classification
    • Stresses on casing
    • Casing setting depth
    • Burst and collapse calculations
    • Wellheads
  • Drilling System – Pressure Loss Calculations
    • Hydrostatics
    • Buoyancy
    • Flow through pipes and annuli
    • Flow path
    • Pressure loss calculations
  • Drilling System – Bit & Nozzles
    • Hydrostatics Bit Types
    • Bit Parts
    • Bit Classification
    • Bit Nozzles
  • Introduction to Well Control
    • Hydrostatics Definitions
    • Causes of kicks
    • Kick indicators
    • Shut-in procedure
    • Well Kill Procedures
  • Directional Drilling
    • Reasons for directional wells
    • Planning Trajectory
    • Kickoff Methods
    • Survey Methods
    • Survey Calculations
    • Hole Assemblies

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

Print This Post Print This Post Email This Post Email This Post

Share

BASIC DRILLING ENGINEERING AND ENVIRONMENTAL SAFE DRILLING PRACTICE – BANDUNG

[S093-194-1012]

WAKTU
10-14 Januari 2011

-ALMOST RUNNING-

TEMPAT

Hotel Golden Flower Bandung

INVESTASI

1. Rp 7.950.000/person (full fare) or

2. Rp 7.750.000/person (early bird, payment before 3 January 2011) or

3. Rp 7.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module

2. Flash Disk contains training material

3. Certificate

4. Stationeries: NoteBook and Ballpoint

5. T-Shirt

6. Bag

7. Training Photo

8. Training room with full AC facilities and multimedia

9. Lunch and twice coffeebreak everyday of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

DESKRIPSI

TRAINING OBJECTIVES :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

1. Memahami prinsip-prinsip dasar dan berbagai perhitungan untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.

2. Melakukan diagnosis dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.

3. Membuat analisis terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran kinerja dan merencanakan pengembangannya.

4. Melakukan perhitungan-perhitungan kuantitatif untuk perencanaan lumpur pemboran, semen, hidrolika, well control.

5. Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.

6. Pengetahuan tentang Peraturan Perundangan dalam K3L

7. K3L dalam Operasi Pemboran

PRE-REQUISITE :

¨ Latar belakang : Operator/Senior Operator/Engineer/Non Engineer

CAKUPAN MATERI TRAINING :

1. Introduction : Rotary Drilling Operations

– Steps to drilling a well

– Types of rigs

– Rig Components

– Rig Systems

2. Rheology of Drilling and Completion Fluids

– Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids

– Fluid Types,

– Fluid Models

– Introduction to Rotary Viscometer

– Other Testing Equipment

– Objectives of Monitoring Fluids

3. Mud System

– General Equations and ConceptsDiagnostic tests

– Water based muds

– Oil based muds

– Additives

– Mud handling system

4. Cementing

– Tubing DesignFunctions of cement

– Cement Types

– Cement Additives

5. Oil Field Tubulars and Hydraulics

– Drill string

– Casing and tubing

– Casing classification

– Stresses on casing

– Casing setting depth

– Burst and collapse calculations

– Wellheads

6. Drilling System – Pressure Loss Calculations

– Hydrostatics

– Buoyancy

– Flow through pipes and annuli

– Flow path

– Pressure loss calculations

7. Drilling System – Bit & Nozzles

– Hydrostatics Bit Types

– Bit Parts

– Bit Classification

– Bit Nozzles

8. Introduction to Well Control

– Hydrostatics Definitions

– Causes of kicks

– Kick indicators

– Shut-in procedure

– Well Kill Procedures

9. Directional Drilling

– Reasons for directional wells

– Planning Trajectory

– Kickoff Methods

– Survey Methods

– Survey Calculations

10. Health, Safety and Environmental Consideration in Drilling Operation

– Peraturan Perundangan tentang K3L

– Pengauh Gas Beracun pada Operasi Pemboran

– Pengaruh Gas Beracun Bagi Kesehatan

– H2S

– Gas Detection Equipments

– Noise level & exposure in Oil Gas Industry

– Noise Mapping

INFORMASI PENDAFTARAN
– Silahkan isi form dibawah ini jika anda ingin mendaftar :

Print This Post Print This Post Email This Post Email This Post


Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share
Share