Formation Damage And Well Stimulation – BANDUNG

[S093-300-1104]

WAKTU

Pilih waktu yang diinginkan di bagian pre registration form

a. 20 – 23 June 2011
b. 28 November – 1 December 2011

TEMPAT

Hotel Jayakarta, Bandung

INVESTASI

1. Rp 7.250.000/person (full fare) or
2. Rp 7.000.000/person (early bird,payment 1 week before training)
3. Rp 6.750.000/person (if there are 3 or more persons from the same company)

FACILITIES FOR PARTICIPANTS:
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

INSTRUKTUR

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.
Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.
Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

DESKRIPSI

TRAINING MATERIAL OUTLINE :
1. Basic Introduction of Formation Damage and Hydrocarbon Well Stimulation
a. Damage caused by drilling mud
b. Damage caused by production well system
c. Damage caused by Well Geometry
d. Well damage modeling
2. Damage Measurement and Quantification System
a. Pressure Built Up Test
b. Pressure Drawdown Test
c. Multirate Test
3. Rock Mechanics and Reservoir Fluids
a. Insitu Stress
b. Overburden Stress
c. Flow Reign and Fluid Rheology
4. Acidizing Techniques
a. Well Test basic principal
b. Fluid flows in porous media
c. Well Test types
5. Acid Chemical Reaction and Reservoir Acid Rocks
a. Acid reaction with Carbonate Rocks
b. Acid flow to Mineral Surface
c. Acid spreading into the rocks
6. Additives in Acidizing
a. Surfactant
b. Corrosion Inhibitor
c. Iron control
d. Alcohol
e. Mutual Solvent
f. Clay Stabilizer
7. Reservoir Rocks Mineralogy
a. Mineral surface area
b. Carbonate Rock
c. Moxie Mineral
8. Well Choosing Techniques for Acidizing
a. Evaluation Model
b. Transient Pressure Analysis
9. Acidizing Calculation Examples
10. Fluid Fracturing and its Additives
a. Fluid Fracturing composition
b. Basic Fluids choosing
c. Other Additives
11. Proppant
a. Proppant types
b. Proppant Size Specification
c. Fracturing Conductivity
12. Hydraulic Fracturing Geometric Model
a. Pan American Model
b. PKN and KGD Model
c. Continuum Damage Mechanics Model
13. Fracturing Pressure Analysis
a. Basic Equation
b. Pressure during Fracturing
14. Frac Data
a. Formation Break Down
b. Step Rate Test
c. Shut-In Decline Test
15. Hydraulic Fracturing Design
a. Input Data
b. Hydraulic Fracturing Optimization
16. Hydraulic Fracturing Operation Evaluation

PARTICIPANTS PRE-REQUISITE :
The participants should have petroleum basic knowledge for Operator, Senior Operator, Junior Engineer and Engineer

WHO SHOULD ATTEND THIS TRAINING?
– Operator/ Sr. Operator/ Jr. Engineer/ Non Engineer
– Petroleum Engineers, Reservoir Engineers, Production Engineers
– Well Service Engineers
– Everybody or professionals who wants to better understanding and broaden their knowledge from the course subject

INFORMASI PENDAFTARAN
– Silahkan isi form dibawah ini jika anda ingin mendaftar :

atau ketik SMS dengan format :

DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL

-kirim ke 085286451074

Contoh :

DAFTAR COALMINING#27April2011#ARIEF#IS21#3#ariefbills@gmail.com

Print This Post Print This Post Email This Post Email This Post


Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

Comments are closed.

Post Navigation

Share