Category Archives: Petroleum

Petroleum Engineering for Non Petroleum Engineer – BANDUNG

[S300]

WAKTU

9-11 Agustus 2016
13-15 September 2016
10-12 Oktober 2016
28-30 November 2016
13-15 Desember 2016

TEMPAT

Hotel di Jakarta

INVESTASI

Jakarta, Bandung Rp. 7.500.000,- Per Peserta
Yogyakarta Rp. 8.000.000,- Per Peserta
Surabaya, Bali dan Batam Rp. 8.500.000,- Per Peserta
*Termasuk : Modul Handout, Certificate, 2x Coffee Break/day, Lunch/day, Souvenir menarik.

FASILITATOR

TIM INSTRUKTUR PT. ZIGOT MEDIATAMA

DESKRIPSI

Petroleum Engineering for Non Petroleum Engineer

COURSE OBJECTIVES :
After completing this course participants are expected to:

  • Understand the basic principles of exploitation of oil, natural gas, known as petroleum engineering.
  • Conduct a simple diagnosis and understanding of oilfield operations data management, such as petroleum geologiy data, rock and fluid reservoir data, production data, data drilling operations even the economic analysis of the data
  • Create a simple analysis of the data and perform data processing by using standard methods in petroleum technology
  • Perform simple quantitative calculations of the entire data acquisition petroleum operations: production geology, formation evaluation data production engineering and reservoir engineering data, drilling data, production data and economcs analysis data.

PRE-REQUISITE :

The background of course participants (not specified) : Operator, Sr.. Operator, Engineering and Non Engineering

COURSE OUTLINE :

  • Notion of Petroleum Engineering and Petroleum Engineering data Management
    • Production Geology Data
    • Reservoir Engineering Data
    • Drilling Engineerig Data
    • Production Engineering Data
    • Economics Analysis Data
  • Reservoir Hydrocarbon Reservoir
    • Origine of Hydrocarbon Reservoir
    • Reservoir Pressure and Temperature
    • Reservoir Fluids Properties
    • Reservoir Rocks Properties
  • Reserve Estimation
    • Original Hydrocarbon In-place
    • Rock Thickmess
    • Iso-Porosity Map
    • Iso-Capasity Map
    • Recovery Factor
  • Reservoir Performance Analysis
    • Gas Reservoir Recovery Factor
    • Oil Reservoir Recovery facor
    • Efficiency Recovery
    • Material Ballance Equation
    • Predictionof Reservoir Performance
  • Drilling and Completion
    • Drilling and Completion Operation
    • Drilling Expenditure
    • Completion
    • Drilling Fluid Priperties
    • Data Accuisition
    • Drilling Optimasation
    • Special Problem in Drilling
    • Drilling Equipments
  • Formasi Evaluation of Hydrocarbon Reservoir
    • Permeable Formation Determination
    • Rocks Porosity Determination
    • Fluides Saturation Determination
    • Resevoir Average Thichness Determination
    • Formation Evaluation Equipments
  • Production Enginering
    • Inflow Performance Relationship
    • Primary Recovery Technology
    • Enhanced Oil Recovery Technology
    • Downhole Production Equipments
  • Surface Production Facilities
    • Field Processing Unit
    • Oil and Gas Pipping System
    • Surface Production Facilities Equipments
  • Basic of Petrolem Economics
    • Parameter Utama Analisis Keekonomian
    • Net Present Value
    • Internal Rate of Return
    • Pay Out Time
    • Profit tInvesment Ratio
    • Field Case Example

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016
Print This Post Print This Post Email This Post Email This Post

Share

PETROLEUM ECONOMIC & ACCOUNTING – Yogyakarta

PETROLEUM ECONOMIC & ACCOUNTING – Yogyakarta

[S307]

WAKTU

  • Selasa – Kamis, 23 – 25 Agustus 2016
  • Selasa – Kamis, 27 – 29 September 2016
  • Selasa – Kamis, 25 – 27 Oktober 2016
  • Selasa – Kamis, 22 – 24 November 2016
  • Selasa – Kamis, 27 – 29 Desember 2016

TEMPAT

 Hotel Ibis Style Yogyakarta
 Hotel Horisson Ultima Riss Yogyakarta
 Hotel Grand Zurry Yogyakarta
 Hotel Jambuluwuk Yogyakarta
 dan Hotel-hotel berbintang di Yogyakarta

2. Inhouse Training di perusahaan

INVESTASI

  • Investasi pelatihan selama 3 (tiga) hari ini adalah senilai Rp 6.000.000,- (Enam Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
  • Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 5.500.000,- (Lima Juta Lima Ratus Ribu Rupiah).
  • Untuk pelaksanaan di kota lain, harga menyesuaikan dengan jumlah peserta
  • Including : Trainer yang berkualitas, Module / Handout, Sertifikat, Training Kit (tas, block note, alat tulis, flask disk), Souvenir, 1 X Dinner, Pick up dari bandara jika mengirimkan minimal 2 peserta.

FASILITATOR

Alex Murtin, SE, M Si, Akt/Imam Bintoro, SE MSFIN/Drs. Achmad Tjahjono, MM, Akt/Ichsan Setiyo B, SE, M Sc, Akt dan Team
(Pakar dalam bidang akuntansi dan keuangan, akademisi dan sekaligus praktisi, yang telah berpengalaman dalam memberikan training & consulting pada organisasi/perusahaan milik pemerintah maupun swasta)

DESKRIPSI

Kegiatan usaha minyak dan gas bumi mempunyai karakteristik khusus baik fungsi strategis maupunfungsi vital, antara lain teknologi tinggi, padat modal dan memiliki resiko yang tinggi yang berpotensi menimbulkan berbagai dampak ekonomi, teknis, politik, dan keselamatan kerja dan pencemaran lingkungan. Untuk meminimalisasi timbulnya resiko tersebut, dianggap perlu untuk melakukan pembinaan dan pelatihan atas terhadap seluruh pelaku di bidang usaha perminyakan ini untuk mempelajari dan mendalam bidang ke-ekonomian migas (petroleum economic), yang juga merupakan salah satu mata rantai dari industri sektor MIGAS.Pelatihan ini diberikan agar meningkatkan pengetahuan dan kompetensi yang diperlukan bagi para pekerja/karyawan yang terlibat baik langsung maupun tidak langsung didalam kegiatan ekonomi perminyakan serta memberikan pemahaman tentang kwalitas dan pengukuran migas yang sesuai dengan standard teknis dan ketentuan yang berlaku.
Tujuan dari pelatihan ini adalah :
1. Memberikan pengetahuan praktis untuk mengetahui secara teknis tentang cara-cara pengukuran volumetric dan standart kualitas dari minyak bumi.
2. Menentukan cadangan ekonomis dan peramalan production flow di mana mendatang.
3. Teknik pengiriman/transportasi migas

MATERI
Outline Materi:
1. INTRODUCTION : Perhitungan Cadangan, Peramalan Production Flow
2. Risk and Return : Volatility, Capital Structures, Weighted Average Cost of Capital (WACC), Cost of Equity Capital
3. Standad Teknis Pemeriksaan Dan Pengukuran : Gambaran umum mengenai standard, Sistem satuan, Kuantitas dalam Custody Transfer, Menentukan Weight in Air, Penentuan angka kuantitas
4. Pengukuran Dan Penentuan Volume Petroleum Secara Statistik. : Metode gauging tanki darat, Pengukuran temperatus cairan, Sampling & penentuan kuantitas, Penentuan volume hasil gauging, Shore pipeline, Metode gauging tanki kapal, Tabel kalibrasi tanki, Penentuan volume OBQ / ROB, Vessel experience factor ( VEF)
5. Penentuan Kuantitas Petroleum Secara Dinamik : Deskripsi metode dinamik, Prinsip perhitungan dengan metering
6. Penentuan Kuantitas Petroleum : Konversi antar besaran volume, Penentuan angka B/L
7. Penentuan Kuantitas LPG Secara Static : Prinsip penentuan kuantitas LPG, Penentuan volume tanki dan hal-hal lain yang perlu diperhatikan
8. Carriage Of Good By Sean : Aturan international, Bill of lading, Charter parties, Latdays, Laytime, Demurage, Pumping rate
9. Cargo Shoretage Dan Kontaminasi : Deskripsi umum, Klim kekurangan dan kontaminasi
10. International Trade : Contract of sale, Trade terms, Document credit, Manfaat letter of credit, Definisi & prinsip letter of credit, Dokumen perdagangan international, Financial dokumen, Shipping dokumen

PESERTA
Manager
Superintendant
Operator
Technician
Staff: Eksploitasi, Eksplorasi, Produksi, Lapangan / operasional, Procurement, Keuangan dan Legal

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016
Print This Post Print This Post Email This Post Email This Post

Share

PETROLEUM INDUSTRY FOR NON-PETROLEUM ENGINEER

[S084]

WAKTU

Bandung, September 06 – 09, 2016

Bali, November 08 – 11, 2016

INVESTASI

IDR 9.750.000 ,-/ Person, (excluded tax 10% and accommodation)

NARASUMBER

This specially designed course will be conducted by *Hilman Ahmad & Associates*, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Professional Industrial Oil & Gas Education Center, and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979. ***

DESKRIPSI

In this special course, the participants will be given the basic tools needed to understand and work with these professionals involved in petroleum exploration, land issues, drilling and production as well as with some of the legal issues. Beginning with a discussion of how oil & gas is formed and then trapped, the course explains how explorationists decide where to look and how they find economic deposits; how the petroleum is extracted, transported and refined and finally reaches the marketplace.
The course describes the organizational structure of a typical energy company, and the duties and responsibilities of the various professions. The tools, machinery and operations of the industry are also described.

WHO SHOULD ATTEND?
All non-technical personnel – technical exploration/exploitation and drilling assistants, secretaries, finance, logistic, procurement and everyone who needs to expand their horizon in petroleum industry.

 

Share

Petroleum Secretary Workshop

[S084]

WAKTU

Bandung, 20 – 22 September 2016

Bali, 13 – 15 Desember 2016

INVESTASI

IDR 8.750.000,-/ Person, Registration deadline a weeks before training held.

INSTRUKTUR

Kris Sumargo Hendardjo. He has more than 25 years experienced as trainer in domestic & overseas in “Soft Skill”major, ie. Leadership & Management Skills, Communication, Motivation, Outbound and Interpersonal Skills for various Oil Companies, Mining, Banks, Automotives, Insurances, Fertilizer, Garments, Chemical Industries, Telkom, PLN, Peruri etc. His professional career started on PT. Stanvac Indonesia (1976) as District Geologist, Arco (1980- 1982) as development geologist, Conoco Indonesia Inc. (1982-1998) as Chief Geoscientist, for 17 years in Conoco Indonesia Inc., he had got training assignment for 2 year in Conoco London, UK (1985-1986) and Working assignment in Conoco Houston, USA (1991-1993). He continued his career in Sperry-Sun as Sales Manager and Halliburton Indonesia as Account Manager. He has been implementing his knowledge and experience through develop companies and actives as trainer/instructor/lecturer in universities and institutions, i.e University of Indonesia, Bogor Agricultural University, Trisakti, Bina Nusantara, UPN-Jogjakarta, Unisma Bekasi. He also trusted as Principle Centered Leadership (PCL) facilitator for all Conoco Indonesia employees. Certified Facilitator of Covey Leadership Center for the 7 Habits Program. In 1996, he obtained “Highest Award for Achievement from Dale Carnegie Institute- for his expertise and skill in motivation teaching. As professional, he also involve as member in AAPG, IAGI, HAGI, HFI, Member of KIKAS (Indonesian Chamber of Commerce and Industry-the US Committee)and SPE member. Evaluation, etc. To get more advance information and knowledge he has participated in domestic and overseas training, seminar, course and conference as participant or speakers.

DESKRIPSI

This course is designed to develop our role in today’s changing workplace and manage time and responsibilities more effectively. It also help us to identify our communication style and the style of co-workers, learn new strategies for dealing with people and find out how to facilitate team effort and team decisions.

OBJECTIVES:

The objective of the course is to arm and equip the secretary to:
– Appreciate the complexity of oil and gas business and understand the need for the Integration of the activities to make up the petroleum industry
– Manage the office more efficiently and efficiently
– Face the challenges of your changing role competently
– Take feedback and criticism positively and give timely constructive responses to promote greater team effort
– Manage time and responsibilities more effectively
– Partnering your boss

WHO SHOULD ATTEND?
Senior secretary, executive secretary, office managers and others who need to upgrade their professional skills.

TRAINING METHOD:
During the training, participant will be in interactive learning mode, by actively join the group discussion, sharing concepts, role plays, games and case studies.

 

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016

Print This Post Print This Post Email This Post Email This Post

Share

Expanded Petroleum Economic – BANDUNG

[S084]

WAKTU

Bandung, 11 – 14 Oktober 2016

Yogyakarta, 08 – 11 2016

INVESTASI

IDR 9.750.000,-/ Person, Registration deadline a weeks before training held.

INSTRUKTUR

Arsegianto, He is a Doctor at Department of Petroleum Engineering of The Institute Teknologi Bandung, Indonesia. He earned his Master of Science from University of Wisconsin, Madison (USA) at Department of Urban and Regional Planning in Major Energy Analysis, Policy and Planning. He obtained his Doctor from Asian Institute of Technology, Division of Energy Technology in Bangkok, Thailand. He has been delivering training course in Economic, Finance, Marketing, Policy and Planning Analysis of Petroleum & Gas Industry since 1992. He also has expertise in technical petroleum engineering. His professional experiences include contributing author in many congresses, conventions, exhibitions, seminars, workshops, symposiums & conferences. His current membership of the International Association For Energy Economics (IAEE), Society of Petroleum Engineering (SPE), Society of Indonesian Petroleum Engineers, & Komite Nasional Indonesia – World Energy Council (KNI-WEC).

DESKRIPSI

This course is to summarize the state of the art of Petroleum Economics Concept Based on Engineering Economics. It included the example problems to illustrate the use of various theoretical solutions. In this course we will discuss the time value of money concepts, different types of interest arrangement, converting cash flows (cash inflows or outflows) from one period to another, methods used to select the best economic service producing investments, methods used to select the best economic revenue producing investments (mutually exclusive and non-mutually exclusive), the development of after-income tax cash flows, expected value concept and other useful statistical techniques.
All of concepts in this course are presented in a hands-on manner. You may be already reasonably familiar with some of the concepts; in which case, you may skip those and proceed to the ones that you are not familiar with. You will notice that most of the methods presented if properly used, will give the same results. The reason for including so many methods is to complete the presentation. In some cases it may be advantageous to use on method over the other. Therefore, it is necessary that you be familiar with all of the methods presented.
This course compiled as aid to engineers and production people in the Petroleum Industry who have the responsibility of planning and decision making in oil or gas field development. It includes fundamental principles of engineering economics used in petroleum industry. It also included the tables, data and general information which it will be value to everyone who responsible to make decision making in petroleum economics domain.
Much material of this course has been published previously and is reassembled in this course. However, there is also a considerable amount of new material included that will assist the participants. In this course, it has also included example problems to illustrate the use of various theoretical solutions. Wherever possible, it has not only discussed practical difficulties that one may encounter while using the theoretical solutions, but it has also listed some of the method that one can used to obtain the desired information.
This course is mainly directed to the practicing professionals who make engineering calculations and decision on oil and gas field development. For managers, the course helps to review the present state of the art of petroleum engineering economics used for decision-making according to field economics parameters.
COURSE OUTLINE
Reserve and Hydrocarbon Reserve Exploitation
– Basic Concept
– History of Reserve Definition
– Reserve Classification
– Reserve Calculation
– Proved Reserves Guidelines Improved Recovery

Time Value of Money Concepts
– Hydraulic Fundamentals
– Time Value of Money
– Simple and Compound Interest
– Present Value of Future Sum
– Present Value of Annual Sums
– Annual Equivalent of Future Sums
– Annual Equivalent of Present Sums
– Present Value of Deferred Annuity
– Arithmetic gradient Series
– Capitalized Cost Calculations
– Continuous Compounding and Discounting
– Determining Interest Rates
– NPV, NAV, and NFV Computations
– Rate of Return (ROR) Calculations

Comparison of Service Producing
Investment
– PV, AV, and FV of cost analysis
– Rate of return Analysis
– Service Life Breakeven Analysis
– Unequal Life Service Producing Alternatives

Analysis of Income Producing Investments
– Single Independent Investment Analysis
– Mutually Exclusive Investment Analysis
– Non Mutually Exclusive Investment Analysis

Depreciation
– Straight Line Depreciation
– Declining Balance Depreciation
– Sum of Years `Digits Depreciation
– Accelerated Cost Recovery System (ACRS)
– Modified Accelerated Cost recovery System (MACRS)
After-Tax Cash Flow Analysis
– Amortization and Depletion
– Investment Tax Credits (ITS)
– Intangible Drilling Costs (IDC)
– Minimum Tax and Tax Preference Items
– After-Tax Cash Flow

Expected Value Concepts
– Definition of Probability
– Expected Net Present Value (ENPV)
– Expected Present Value Ratio (EPVR)
– Expected Net Present Value Profile
– Decision Tree Analysis

Equations and Mathematical Techniques
– Regression Analysis
– Mean, Variance, and Standard Deviation
– Normal Probability Distribution
– Log-Normal Probability Distribution
– Solving Problems Requiring Trial-and-Error Calculation

How to Choose the Alternatives
– Investment Analysis
– The Role Depreciation
– Taxes
– Project Financing
– The Effect of Inflation
– Decision Making
– Monte Carlo Simulation

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016

Print This Post Print This Post Email This Post Email This Post

Share

Petroleum Finance, Accounting & Cost Control – BANDUNG

[S084]

WAKTU

Bandung, 06 – 09 September 2016

Yogyakarta, 08 – 11 November 2016

INVESTASI

IDR 9.750.000 Person, (excluded tax 10% and accommodation)

INSTRUKTUR

Arsegianto, he is a Doctor at Department of Petroleum Engineering of the Institute Teknologi Bandung, Indonesia. He earned his Master of Science from University of Wisconsin, Madison (USA) at Department of Urban and Regional Planning in Major Energy Analysis, Policy and Planning. He obtained his Doctor from Asian Institute of Technology, Division of Energy Technology in Bangkok, Thailand.
He has been delivering training course in Economic, Finance, Marketing, Policy & Planning Analysis of petroleum & Gas Industry since 1992. he also has expertise in technical petroleum engineering. His professional experience include contributing author in many congresses conventions, exhibition, seminars, workshop, symposiums & conferences. His current membership of the International Association For Energy Economics (IAEE), Society of Petroleum Engineering (SPE), Society of Indonesia Petroleum Engineering, & Komite Nasional Insonesia – World Energy Council (KNI-WEC).

DESKRIPSI

Making the most efficient use of your financial resources is critical to the success of any producing company. Finance and accounting comprise the universal business language and help you manage your resources effectively. Planning and decision – making that occur in an informal financial context permit better application of recourse and promote competitive advantage. The aim of this course is to improve delegates’ job performance by enhancing their understanding of current international practices in finance and accounting within the E&P industry. This is achieved through an examination of: accounting standards, policies and practices in the oil and gas. An understanding of accounting also allows a company to trace a competitor’s actions from its financial statement and to plan accordingly. These concepts will be presented and reinforced using relevant examples and case studies. Participants are encouraged to bring their company’s financial reports.

THE OBJECTIVE OF THE COURSE:
– To Learn Basic of Technical Economics.
– To give comprehension of general management in oil field.
– To find out and analyze design in ‘Work Program and Budget’of oil company.
– Calculation and analysis of field profit determination.

WHO SHOULD ATTEND?
– Reservoir Engineer
– Production Engineer
– Production Supervisor
– Economist and Accounting
– POD division

THE COURSE OUTLINE:
1. Overview of Petroleum Finance, Accounting and Cost Control.
– Methods to measure profit indicators.
– Determining choices from alternatives.
– Cost Analysis.
– Cost structure for Tax Calculation.
– Oil, Gas, and Energy prices.
2. Oil company business contract model in Indonesia.
3. Basic Reservoir Engineering.
4. Work Program and Budget.
5. General POD and AFE.
6. Government Tax and Non-Tax Revenue.
7. Determining Oil and Gas process.
8. Oil and Gas company management.
9. Risk and Sensitivity Analysis management.

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016

Print This Post Print This Post Email This Post Email This Post

Share

Petroleum Industry For Administration Personnel – BANDUNG

[S084]

WAKTU

Bandung, 06 – 08 September 2016

Bali, 06 – 08 Desember 2016

INVESTASI

IDR 8.750.000,-/ Person, Registration deadline a weeks before training held.

INSTRUKTUR

Kris Sumargo Hendardjo. He has more than 25 years experienced as trainer in domestic & overseas in “Soft Skill”major, ie. Leadership & Management Skills, Communication, Motivation, Outbound and Interpersonal Skills for various Oil Companies, Mining, Banks, Automotives, Insurances, Fertilizer, Garments, Chemical Industries, Telkom, PLN, Peruri etc. His professional career started on PT. Stanvac Indonesia (1976) as District Geologist, Arco (1980- 1982) as development geologist, Conoco Indonesia Inc. (1982-1998) as Chief Geoscientist, for 17 years in Conoco Indonesia Inc., he had got training assignment for 2 year in Conoco London, UK (1985-1986) and Working assignment in Conoco Houston, USA (1991-1993). He continued his career in Sperry-Sun as Sales Manager and Halliburton Indonesia as Account Manager. He has been implementing his knowledge and experience through develop companies and actives as trainer/instructor/lecturer in universities and institutions, i.e University of Indonesia, Bogor Agricultural University, Trisakti, Bina Nusantara, UPN-Jogjakarta, Unisma Bekasi. He also trusted as Principle Centered Leadership (PCL) facilitator for all Conoco Indonesia employees. Certified Facilitator of Covey Leadership Center for the 7 Habits Program. In 1996, he obtained “Highest Award for Achievement from Dale Carnegie Institute- for his expertise and skill in motivation teaching. As professional, he also involve as member in AAPG, IAGI, HAGI, HFI, Member of KIKAS (Indonesian Chamber of Commerce and Industry-the US Committee)and SPE member.

DESKRIPSI

This intensive 3-day advanced course provides the participants with an integrated, comprehensive and complexity understanding of the oil and gas industry. It presents the main aspects of the industry with focus on exploration, development and exploitation of oil and gas resources. The course also addresses some of the advanced theoretical and practical issues involved in reservoir appraisal, and field development options and optimization, supported by numerous examples from the on-shore and offshore areas.

The workshop provides an overview of the petroleum industry, particularly in Indonesia. The workshop provides non-technical support personnel an overview of the exploration/production process. To arm them with the terminology associated with these procedures and practices which will increase their understanding of the process and facilities communication between them and the engineers and geologist they work with.

WHO SHOULD ATTEND?
o Senior staff includes anyone who needs to acquire and understand advanced cornerstone of the petroleum operation and industry.
o Exploration/Engineering/Technical Assistant and Secretaries.

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation
– Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
– Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
– Casual clothing is recommended. The training atmosphere is informal.

Facilities
– Quality training material (hardcopy and softcopy)
– Quality training kits included calculator, T-shirt or jacket, cap, ect.
– Interactive presentation with discussion
– Lunch per day with Morning and afternoon coffee breaks
– Certificate of Completion
– Half day city tour at the end of training session following by dinner with entertainment (optional)
– Exclusive flash disk.

INFORMASI PENDAFTARAN

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2016 |
INFORMASI SEMINAR 2016 |
JADWAL TRAINING TAHUN 2016 |
INHOUSE TRAINING 2016 |
TRAINING INDONESIA 2016 |
TRAINING CENTER 2016

Print This Post Print This Post Email This Post Email This Post

Share

Penerapan PTK 007 Rev 3/2015 dan TKDN sebagai pedoman pada Industri Hulu Migas Indonesia (Tatacara Penilaian dan Aplikasinya berdasarkan Update PTK 007 Rev 3/2015)

[S300]

TIME

  • 23-24  Maret 2016
  • 12-13 Apr 2016
  • 25-26 Mei 2016
  • 1-2 Juni 2016
  • 13-14 Juli 2016
  • 23-24 Agustus 2016
  • 14-15 September 2016
  • 12-13 Oktober 2016
  • 29-30 November 2016
  • 8-9 Desember 2016

VENUE

Puri Denpasar Hotel Jakarta

INVESTMENT

Rp .7.500.000,-

FACILITATOR

Bapak Bhakti Endratama

DESCRIPTION

Penerapan PTK 007 Rev 3/2015 dan TKDN sebagai pedoman pada Industri Hulu Migas Indonesia (Tatacara Penilaian dan Aplikasinya berdasarkan Update PTK 007 Rev 3/2015)

Tantangan industri migas Nasional ke depan selain meningkatkan produksi adalah meningkatkan efisiensi operasi dan kapasitas nasional. Banyaknya usulan dan usaha-usaha terobosan untuk meningkatkan efisiensi operasi atau usaha menekan cost recovery serta adanya peratusan menteri perindustrian tentang usaha meningkatkan TKDN dan kapasitas nasional membuat SKK Migas harus membuat PTK 007 . Perubahan sebagai pedoman barang dan jasa yang baru di Industri Migas Nasional

Pelatihan ini akan memberikan gambaran yang jelas atau improvement yang dilakukan pada pedoman tata kerja (PTK 007) Rev III/2015. Pelatihan juga membahas secara rinci tentang penerapan pedoman tersebut. Pada pelaksanaan pengadaan barang dan jasa di industri hulu migas di indonesia.

Pelatihan juga didesain untuk meningkatkan kemampuan peserta dalam memahami konsep TKDN yang baru, dilanjutkan dengan penjelasan dan simulasi lengkap.

SASARAN PESERTA

Perusahaan Jasa (Services) dalam Industry Oil & Gas, dan perusahaan yang banyak berhubungan dengan Industry Oil & Gas. Mulai dari Direktur, Keuangan, bagian Pengadaan dan Marketing.

AGENDA TRAINING

1. Overview SCM

2. Kewenangan dan pengawasan kegiatan pengadaan Kontraktor Kontrak Kerja Sama,

Strategi pengadaan & jenis-Jenis Kontrak rencana kerja pengadaan.

Pelaku pengadaan : Pejabat Berwenang, Pengguna Barang/Jasa, Pengelola Pengadaan,

Panitia Pengadaan dan Penyedia Barang/Jasa.

3. Pelaksanaan pengadaan dalam rangka pengutamaan penggunaan barang/jasa produksi, dalam evaluasi pernyataan tingkat komponen dalam negeri.

4. Evaluasi pernyataan tingkat komponen dalam negeri

5. Pengawasan Pemenuhan komitmen pencapaian TKDN dalam kontrak.

6. Harga perhitungan sendiri / Owner’s Estimate dokumen pemilihan barang/jasa

Jaminan Pengadaan

7. Metode pemilihan penyedia barang/jasa pelelangan umum, Pelelangan terbatas,

Pemilihan langsung, Penunjukan langsung, Procurement dan Swakelola tatacara pelelangan umum, pengumuman & pendaftaran. Penilaian Kualifikasi, Pemberian penjelasan & protes, pembukaan penawaran. Pembinaan Penyedia Barang / Jasa Negosiasi penetapan & penunjukan pemenang sanggahan kontrak dan pembinaan penyedia barang / jasa.

8. Memahami kebijakan/peraturan TKDN di Indonesia

9. Konsep dasar perhitungan TKDN sesuai dengan peraturan yang berlaku.

10. Formula penghitungan TKDN

11. Formulir pengisian TKDN ( SC-12 A.2 / SC-12 B / SC -12 C )

12. Contoh Perhitungan HE – TKDN – PSp

13. Menghitung sanksi finansial suatu kontrak yang disebabkan oleh nilai TKDN yang tidak terpenuhi

14. Pernyataan TKDN pada tahap Penawaran

15. Kegiatan pengadaan yang memerlukan persetujuan SKK MIGAS.

16. Memahami peraturan TKDN dalam Pedoman Tata Kerja Pengelolaan Rantai Suplai Kontraktor Kontrak Kerja Sama SKK MIGAS dan PTK 007 Rev 3/ 2015

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

PETROLEUM FINANCE, COST CONTROL AND RESERVOIR MANAGEMENT – Yogyakarta

PETROLEUM FINANCE, COST CONTROL AND RESERVOIR MANAGEMENT – Yogyakarta

[S307]

TIME

• 28 – 30 September 2015
• 15-17 Oktober 2015
• 10 – 12 November 2015
• 8 – 10 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT, & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Training Objectives :
1. Memberikan pengetahuan dasar ilmu keekonomian beserta perhitungannya
2. Peserta mengetahui dan memahami dasar-dasar manajemen perusahaan minyak dan gas bumi.
3. Peserta mengetahui dan memahami Simulasi Monte Carlo dan aplikasinya dalam proyek migas
4. Mengetahui peranan Plan Of Development (POD) bagi perusahaan migas
5. Peserta mengetahui dan memahami sistem kontrak yang ada di perusahaan masing-masing.
6. Peserta bisa melakukan perhitungan sendiri dan merencanakan manajemen reservoir di masa yang aka datang secara lebih baik.
MATERI
Outline Materi :
1. Mempelajari Dasar-dasar Ekonomi Teknik
2. Metoda-Metoda Untuk Mengukur Indikator Keuntungan
3. Penentuan Pilihan dan Alternatif
4. Basic Reservoir Engineering
5. Analisa Statistik Proyek Migas
6. Pajak dan Penerimaan Pemerintah Bukan Pajak
7. Sistem Kontrak Perusahaan Minyak dan Gas Bumi
8. Simulasi Monte Carlo
9. Simulasi Monte Carlo Untuk Penilaian Prospek Migas
10. Pengantar Plan Of Development (POD)
11. Manajemen Resiko dan Analisis Sensitivitas
12. Analisis Resiko dan Pengambilan Keputusan Proyek Migas
PESERTA
• Drilling Division
• Drilling Manajer, Drilling Supervisor dan Drilling Engineer
• Reservoir Division
• Reservoir Manajer, Reservoir Engineer
• Production Division
• Production Manajer, Production Supervisor, Production Operator
• Maintenance Division
• Accounting Division

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

STRUCTURAL STYLES IN PETROLEUM EXPLORATION

STRUCTURAL STYLES IN PETROLEUM EXPLORATION

[S269]

TIME
Tanggal 23-25 Juni 2015
Tanggal 07-09 Juli 2015
Tanggal 28-30 Juli 2015
Tanggal 04-06 Agustus 2015
Tanggal 11-13 Agustus 2015
Tanggal 25-27 Agustus 2015
Tanggal 01-03 September 2015
Tanggal 08-10 September 2015
Tanggal 15-17 September 2015
Tanggal 06-08 Oktober 2015
Tanggal 20-22 Oktober 2015
Tanggal 27-29 Oktober 2015
Tanggal 03-05 November 2015
Tanggal 10-12 November 2015
Tanggal 17-19 November 2015
Tanggal 24-26 November 2015
Tanggal 01-03 Desember 2015
Tanggal 08-10 Desember 2015
Tanggal 15-17 Desember 2015

VENUE

JAKARTA
BANDUNG
YOGYAKARTA
BATAM
SEMARANG
SURABAYA
DENPASAR
MEDAN
DLL

INVESTMENT

Rp9.500.000, – / peserta / non recidential
Minimal 2 peserta

Fasilitas :

Training Kit
Handout
Certificate
Lunch + 2 X Coffee Break
Souvenir

INSTRUCTORS

Team Trainer

DESCRIPTION

PURPOSE
• Recognize all the different hydrocarbon-bearing structural styles in map and cross-section
• Distinguish the characteristics of each structural style on seismic reflection profiles
• Recognize the arrangement of structural styles and traps within structural families
• Apply mechanical-stratigraphic concepts to understand and predict trap geometry
• Use restoration and balance to validate an interpretation and show the structural evolution

OUTLINE
• Comparative structural geology
• Structural families and styles
• Mechanical principles governing fold and fault geometry
• Predicting structure from stratigraphy
• Folding vs. faulting
• Palinspastic restoration of cross sections
• Structural validation criteria
• Sequential restoration and growth history
• Regional arches and domes
• Compaction and substratal solution
• Wrench faults: simple, convergent, and divergent
• Conjugate and domino-style strike-slip regimes
• Thin-skinned fold-thrust belts
• Fault-related folds
• Duplexes
• Basement-involved contraction
• Vertical and rotational block uplifts
• Inversion: dip-slip to strike-slip
• Thin-skinned extension
• Basement-involved extension
• Half-graben and full graben rift systems
• Domino-style extension
• Diapirs
• Salt sheets
• Roho and counter-regional pseudoextensional fault systems
• Plate-tectonic habitats of structural assemblages
• Tectonic synthesis and exploration project

PARTICIPANTS
Exploration geologists, geophysicists, engineers, and geoscience managers .

TRAINING METHOD
Presentation
Discussion
Case Study
Evaluation

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

BASIC PETROLEUM ENGINEERING (PETROLEUM ENGINEERING FOR NON – YOGYAKARTA

BASIC PETROLEUM ENGINEERING (PETROLEUM ENGINEERING FOR NON – YOGYAKARTA

[S290]

TIME
24 – 26 Jun 2015
1 – 3 Jul 2015
8 – 10 Jul 2015
22 – 24 Jul 2015
29 – 31 Jul 2015
4 – 6 Agus 2015
11 – 13 Agus 2015
18 – 20 Agus 2015
25 – 27 Agus 2015
1 – 3 Sep 2015
8 – 10 Sep 2015
15 – 17 Sep 2015
21 – 23 Sep 2015
28 – 30 Sep 2015
29 Sept – 1 Okt 2015
6 – 8 Okt 2015
20 – 22 Okt 2015
27 – 29 Okt 2015
3 – 5 Nov 2015
10 – 12 Nov 2015
17 – 19 Nov 2015
24 – 26 Nov 2015
1 – 3 Des 2015
8 – 10 Des 2015
15 – 17 Des 2015
21 – 23 Des 2015
29 – 31 Des 2015

VENUE

Hotel Merapi Merbabu Yogyakarta

INVESTMENT

Course Fee : Rp. 6.500.000,-/participant (non residential)
Special Price : Rp. 5.000.000,-/participant (non residensial) Min. 3 Peserta dari perusahaan yang sama

Fasilitas :

1. Training Hand Out
2. Digital Material
3. Certificate
4. Exclusive Souvenir
5. Qualified Bag
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffee break every day of training
9. Qualified Instructor
10. Transportation from airport / railway to hotel and from hotel to the training venue (2 person from one company)

INSTRUCTORS

Ir. Y. Agus Jayatun,M.T and Tim

DESCRIPTION

This course provides introduction to the petroleum industries and petroleum engineering activities. The coverage starts from introducing the petroleum (oil and gas) industries, and it is followed by the illustration and description of oil and gas reservoir (what is it really looks like?). The participants will then be presented the petroleum engineering activities from finding, lifting, and transporting oil and gas. Brief presentation on the current technologies to increase oil recovery will be also presented.

MATERI
1. Petroleum Industry Environment
2. Petroleum Engineering an Overview
3. Petroleum Geology and Exploration
 Basic Concept of Petroleum Geology
 History of Earth and Rock Circle
 Exploration Activities
– Surface and Subsurface Surveys
– Drilling “Wild Cat”
– Reservoir Development Tools
4. Drilling and Well Completion and Operations
 Drilling Concept
 Drilling Technology
 Drilling Material and Equipment
 Drilling Operations and Program
 Well Completions
 Well completion overview
 Well completion equipment
 Well Completion process
Production Technology and Operations
 Type of Production Method
 Surface Fluid Handling and Treating Facility
 Reservoir Pressure Maintenance and EOR
 Production facilities and equipment
Workovers – Well Service Operation
 Overview of Production Problems
 Workover – Well Service Equipment and Operations
Oil and Gas Processing and Facilities
METODE
Kegiatan pelatihan dirancang agar peserta dapat memahami secara komprehensif materi yang disampaikan, sehingga dapat dimplementasikan secara aplikatif dalam dunia kerja. Adapun metode yang digunakan adalah:
1. Presentation
2. Discuss
3. Case Study
4. Evaluation

PESERTA
This course is designed for non engineers who are interested (or already) in the petroleum industries, and engineers who do not involved directly in the petroleum engineering activities.

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

PETROLEUM PRODUCTION SYSTEM – Yogyakarta

PETROLEUM PRODUCTION SYSTEM – Yogyakarta

[S307]

TIME

Jadwal Training Tahun 2015 :
• 7 – 9 Juli 2015
• 4 – 6 Agustus 2015
• 1 – 3 September 2015
• 6 – 8 Oktober 2015
• 3 – 5 November 2015
• 1 – 3 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT; & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Untuk dapat menghasilkan produktivitas pada tingkat yang maksimal, perusahaan industri perminyakan (petroleum industry) seharusnya menyusun, mengaplikasikan dan memperkuat sistem produksinya. Berbagai persoalan yang sering dihadapi perusahaan meliputi fasilitas pengolahan minyak mentah bumi, kondisi geologi dari tempat pengeboran, aliran fluid, persoalan sumur minyak, pengontrolan minyak dan lain sebainya telah menjadi perhatian dari berbagai kalangan yang menginginkan dapat memproduksi minyak lebih optimal. Selain itu, dengan berkembangnya teknologi pengolahan produksi minyak saat ini seharusnya dapat dimanfaatkan perusahaan untuk dapat memompa laju produksinya. Training ini mengetengahkan berbagai teori dan praktik pelaksanaan sistem produksi perminyakan yang telah diaplikasikan dan terbukti berhasil meningkatkan kapasitas produksi perusahaan.
Tujuan
Setelah mengikuti training ini diharapkan peserta dapat :
1. Mengetahui secara mendalam sistem produksi perminyakan modern yang telah teruji kehandalannya di berbagai perusahaan
2. Memberikan ketrampilan untuk mengidentifikasi dan merancang sistem produksi perminyakan yang dapat meningkatkan produktivitas perusahaan
3. Memberikan ketrampilan untuk mendiagnosa permasalahan berdasarkan pengalaman best practice dari ahli yang kompeten dalam bidang sistem produksi perminyakan
MATERI
1. Ruang lingkup Petroleum Production System
2. Advanced Technique to Maximize Reservoir Facilities
3. Petroleum Piping System
4. Sand control
5. Desain pemecahan persoalan well di industri perminyakan
• Produksi yang rendah
• Kerusakan formasi
• Artificial lift
• Low reservoir
• Ketinggian viskositas
• Minyak mentah dan teknologi pengolahan
• Penanganan fasilitas yang dapat meningkatkan produktivitas industri perminyakan
• Studi praktis perencanaan, pengelolaan dan pengontrolan sistem produksi minyak
PESERTA
Direktur Perusahaan, General Manager, Manager Operasi, Manager Produksi, Supervisor produksi, Teknisian.

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

PETROLEUM ENGINEER FOR NON PETROLEUM ENGINEER – Yogyakarta

PETROLEUM ENGINEER FOR NON PETROLEUM ENGINEER – Yogyakarta

[S307]

TIME

Jadwal Training Tahun 2015 :
• 23 – 25 Juni 2015
• 28 – 30 Juli 2015
• 25 – 27 Agustus 2015
• 21 – 23 September 2015
• 27 – 29 Oktober 2015
• 24 – 26 November 2015
• 21 – 23 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT; & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Training Objective :
This course will tell participants from cradle to the grave concerning the oil & gas industry. This course provides introduction to the petroleum industries and petroleum engineering activities. The coverage starts from introducing the petroleum (oil and gas) industries, and it is followed by the illustration and description of oil and gas reservoir (what is it really looks like?). The participants will then be presented the petroleum engineering activities from finding, lifting, and transporting oil and gas. Brief presentation on the current technologies to increase oil recovery will be also presented. Social aspect including HSE, CSR and Decommissioning activity will be covered, so anybody involved in the business will understand how to run the activity safely and to give profits to all of us, including the stakeholders.
MATERI
COURSE CONTENT
1. Basic Oil and Gas Industry
2. Introduction to Oil and Gas Reservoir
3. Oil and Gas Exploration
4. Drilling Operation
5. Drilling Mud
6. Casing Selection and Setting Depth
7. Cementing
8. Completion, Work over and Stimulation
9. Formation Evaluation
10. Introduction to Technical Production
11. Introduction to Surface Facility for Oil and Gas
12. Introduction to Artificial Lift
13. EOR introduction
14. Field management
15. HSE (Health, Safety and Environmental) – ‘new’ pre-requisites
16. CSR or CD
17. Decomissioning (restoration, reclamation or similar )
PESERTA
This course is designed for non engineers who are interested (or already) in the petroleum industries, and engineers who do not involved directly in the petroleum engineering activities, such as: Secretary in petroleum business and support/services companies, Environmental personnel, Safety personnel, ComDev or CSR staff personnel, Security staff personnel, PR staff personnel, Informal organization internal company such as BDI, Umkris and similar, who are not familiar with this roles, Stakeholders leader, NGO and/or CSO who are interest with the oil and gas business in their home-villages

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

PRACTICAL ECONOMIC FOR PETROLEUM PRODUCTION – Yogyakarta

PRACTICAL ECONOMIC FOR PETROLEUM PRODUCTION – Yogyakarta

[S307]

TIME

Jadwal Training Tahun 2015 :
• 23 – 25 Juni 2015
• 28 – 30 Juli 2015
• 25 – 27 Agustus 2015
• 21 – 23 September 2015
• 27 – 29 Oktober 2015
• 24 – 26 November 2015
• 21 – 23 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT; & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Training ini dapat memberikan informasi kepada semua bagian disiplin teknis dan komersial guna memahami teori dan metode yang digunakan untuk mengukur nilai ekonomi minyak maupun gas. Dalam pelaksanaan training ini akan diungkapkan aspek fundamental pekekonomian perminyakan hulu. Selain itu, dalam training ini juga akan diungkapkan dan dibahas dengan detail perihal analisis risiko keuangan (ekonomi minyak dan gas). Diharapkan dari , peserta akan membangun model ekonomi, memasukkan data arus kas yang relevan untuk proyek studi kasus dan skenario.
Tujuan
Setelah mengikuti training ini peserta diharapkan mampu untuk :
1. Memahami unsur investasi dan biaya operasional minyak dan gas,
2. Memahami aturan bagi hasil dari berbagai jenis kontrak sebagai parameter indikator dan laju alir tunjangan tunai.
MATERI
1. Introduction
2. The purpose of the exploitation of Oil and Gas industry
3. Obstacles: The physical properties of rocks, the physical properties of reservoir fluids, flow rate and production settings, the energy reservoir, the technology chosen, etc.
4. Consideration of the technical aspects:
• calculation of reserves
• estimated production rate and well service
• work over and well deepening
• engineering borehole, pressure Maintenace and well stimulation.
• Investment costs and operating costs
• concept of time value of money
• acceleration of projects;
• profit indicator, POT, NPV, PIR and ROR.
• Decline curve and dcline rate
• exponential decline curve
• determination of the rate of QoL and economic boundaries.
• Production sharing contract (PSC, JOB, JOA, TAC, EOR)
• Cash flow: Gross revenue, CR and FTP, sharing, tax and investment, operation cost and net income, discounted cash flow, economic indicators
5. Consideration of economic aspects
6. Forecasting of oil and gas production

PESERTA
Supervisor administrasi, administrasi produksi senior dan staff administrasi

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share

PETROLEUM INDUSTRIAL REFRIGERATION : OPERATION AND MAINTENANCE – Yogyakarta

PETROLEUM INDUSTRIAL REFRIGERATION : OPERATION AND MAINTENANCE – Yogyakarta

[S307]

TIME

Jadwal Training Tahun 2015 :
• 7 – 9 Juli 2015
• 4 – 6 Agustus 2015
• 1 – 3 September 2015
• 6 – 8 Oktober 2015
• 3 – 5 November 2015
• 1 – 3 Desember 2015

VENUE

Hotel di Yogyakarta
available by request in other cities such as : Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

INVESTMENT

Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
• Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).

FASILITAS
• Trainer yang berkualitas
• Module / Handout
• Sertifikat
• Training Kit (tas, block note, alat tulis, flask disk)
• Souvenir
• 1 X Dinner
• Pick up dari bandara jika mengirimkan minimal 2 orang

INSTRUCTOR

Dr. Ir. Eddy Winarno, S. Si, MT; & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Oil dan Gas, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA)

DESCRIPTION

Proses pendinginan memiliki peran penting pada proses produksi minyak dan gas industri seperti pemurnian gas dan proses pencairan minyak bumi. Training ini akan membahas mengenai dasar teori, terminologi terbaru, metode pemecahan masalah, dan prosedur perbaikan dalam operasi dan perawatan pendingin minyak dan gas.
Tujuan
Setelah mengikuti pelatihan ini, para peserta diharapkan mampu :
1. Memahami dasar operasi dan perawatan mesin pendingin pada industry minyak dan gas;
2. Melakukan analisa terhadap kondisi mesin pendingin pada industry minyak dan gas
3. Memahami metode pemecahan masalah dalam operasi dan perawatan mesin pendingin pada industry minyak dan gas
MATERI
1. The Field of Industrial Refrigeration
• Feature of Petroleum Industrial Refrigeration than Comfort Air Conditioning
• What is Industrial Refrigeration
• Application of Refrigeration in Petroleum Industries
2. Units, Refrigerant Issues, and Refrigerant Properties
• Unit Systems and Conversion
• Recent Issue and International Paradigm
• Ozone Depletion and Global Warming
• Benefit of Ozone and Effect of Ozone Hole
• Naming Rule for Refrigerants
• Refrigerant Requirements and Desirable Qualities
• Refrigerants Properties
• p-h Diagram of Refrigerant
3. Refrigeration Cycle
• Essential of a Refrigeration System
• Vapour Compression Cycle
• Absorption Cycle
• Ejector Refrigeration Cycle
• Brayton Refrigeration Cycle
• Absorption Cycle
4. Properties of Oil and Natural Gas
• Petroleum Reservoir Fluids
• Petrolum is Mixture Fluid
• Thermodynamic Properties of Fluids
• Transport Properties of Fluids
• Thermodynamic Diagrams
5. Refrigeration and Cryogenic Systems in Gas Process
• What is Different of Refrigeration and Cryogenic System
• What is Different of Refrigeration and Cryogenic System
• What is Different of Refrigeration and Cryogenic System
• Natural Gas Treatment Process
• Purification Process for Natural Gas Upgrading
• Hydrate Forming and Nature Hydrate
• Water Removal
• Gas Dehydration and Treating
6. Components of Refrigeration Systems
• Compressor
• Condenser
• Evaporator
• Refrigerant Piping
• Liquid Circulation
• Valves and Refrigerant Control
7. Lubrication and Oil Handling
• Oil in Refrigeration System
• Some Types of Refrigeration Oil
• Some Terms Used to Characterize Oil
• Viscosity
• Contaminants in Oil
• Coalescing Oil Separators
• Removing Oil from Refrigeration System
8. Safety
• Safety Requirement
• Safety Code
• Relief Valve
• Ventilation of Machinery Rooms
• Piping and Valves
• Vessels
• Fire Protection
• Leak detection
• A Plant Safety Plan
9. Operation and Maintenance
• Refrigerant Recharging
• Refrigerant Recycle
• Normal Operation
• Maintenance
• Refrigerant Recovery
• Troubleshooting
• Reparation
• Workshop Tools and Related Instructions
10. Retrofit and Its Problems
• What is Retrofit
• Problem in Retrofit
• Suitable of Oil and Refrigerant
• Refrigerant Recycle
• Refrigerant Reclamation
PESERTA
Peserta yang cocok untuk mengikuti training ini adalah seluruh karyawan perusahaan yang bergerak di bidang oil dan gas serta individu yang ingin memperdalam pengetahuan tentang materi training.

REGISTRATION :

ISIKAN FORM BERIKUT :

atau

Ketik SMS dengan format :
DAFTAR<spasi>
JUDULTRAINING#TGLTRAINING#NAMA#PERUSAHAAN#JMLHPESERTA#EMAIL#TELP.KANTOR
-kirim ke 085286451074

Contoh :
DAFTAR TRAINING FINON#2Mei2011#ARIEF#Company#3#nama@email.com#02174709591

INFORMASI TRAINING 2015 | INFORMASI SEMINAR 2015 | JADWAL TRAINING TAHUN 2015 |
INHOUSE TRAINING 2015 | TRAINING INDONESIA 2015 | TRAINING CENTER 2015

Print This Post Print This Post Email This Post Email This Post

Cara cepat dan mudah Registrasi online di Informasi seminar 21. Mencari jadwal seminar dan training atau request in-house training online.
INFOSEMINAR21 | INFOTRAINING21

Share
Share